 |
V Bracket Tube Stand
Height Adjustment (Low to High): 27"- 47"
Max Pipe Capacity: 12"(24” for optional V head)
Max Weight Capacity: 1100 lbs.
|
 |
Offset Electrode Holder
Offset electrode holder for use with weld heads OSK-53G and upwards.
Even though the OSK-G weld heads are the narrowest available some short 'stick out'
applications require the ability to move the electrode position to one side of the weld head,
this accessory provides that function in a simple and easy to use device.
For Dia. 1.6mm tungstens, Item No. 1.3.3106
For Dia. 2.4mm tungstens. Item No. 1.3.3101
|
 |
Multi Position Electrode Holder
Multi positional electrode holder for use with weld heads OSK-53G and upwards.
This accessory provides the ability to position the electrode anywhere within the head space by means of a 'rotational' adjustment.
For Dia. 1.6mm tungstens, Item No. 1.3.3102
For Dia. 2.4mm tungstens, Item No. 1.3.3107
|
 |
Purge Hose with Ball Valve
Purge Hose and valve assembly, 8mtr long with ball valve and 1/4" BSP nut and tail fitting
Purging Hose with Ball Valve, 8mtr, Item No. 1.3.0126
|
|
Sanitary Tack Tube Clamps
Tube Sizes Available: ½" - 6"
|
|
Saw Guides
Tube & Pipe Sizes Available: ½" - 6"
|
a.jpg) |
Deburring Tool |
| Multi - Cut |
 |
Pipe Cutter - 63 x 1.6 x 16 x 64 (BW) T - HSS - 5% COBALT - Titanium Coated
|
 |
Pipe Cutter - 68 x 1.6 x 16 x 72
|
 |
Pipe Cutter - 63 x 1.6 x 16 x 120
|
| |
 |
Gas Shield Collets
Gas-shield collets are especially narrow and made from heat-resistant material for welding fittings, flanges, elbows etc. In combination with offset and multiposition electrode holders the weld can be completed very close to one side of the weld head. Special wide clamps are avialable for improved single side location on request.
Gas-shield collets are available for OSK weld heads size 53/76/115
GA collet sets (1 set = 2 collets)
for OSK 53, Item No. 1.2.3300 + Ø
for OSK 76 (Item No. 1.2.3301 + Ø
for OSK 115 (Item No. 1.2.3302 + Ø
|