Orbital Welding Controllers
Comes Complete with
Tigtronic Basic 2 Controller
Low cost, compact microprocessor based orbital controller for applications with open framed weld heads, enclosed weld heads,
tube-tubesheet weld heads and turn tables. The Basic Controllers are based on our established Tigtronic Orbital Controller.
For use with either of the TETRIX 200 or TETRIX 351 Inverters.
Controller Tigtronic Basic 2, Item No. 1.3.0200
Simple operator guidance through auto calculation of weld schedule parameters (OD tube, wall thickness, weld head code)
Gas and water cooling monitoring
Options for 6 level programming with step and continuous travel modes
Simple tuning of auto calculated parameters by individual level or overall percentage
Graphic display of the welding progress
Real time monitoring of the welding parameters
Integrated weld counter
Storage of up to 70 programmes
Software updated possible
Diagnostic fault detection system
Options for connecting both cabled or wireless remote control pendants (Note: The controller can also be operated without a remote pendant)
Compact and light, dimensions (L x W x H) 340x295x150mm and a weight of only 5.5kg
Auto ranging input voltage 90-260VAC
Optional:
COOL 50 Water Cooling Unit
Upgrade kit AVC
Package includes
Controller
Connection cable controller to power source
Power cable
USB stick, 1GB
Tigtronic Basic 3 Controller
Low cost, compact microprocessor based orbital controller for applications with open framed weld heads,
enclosed weld heads, tube-tubesheet weld heads and turn tables. The Basic Controllers are based on our established Tigtronic Orbital Controller.
Controller Tigtronic Basic 3, Item No. 1.3.0201
Specification as per the Tigtronic Basic 2
Additional servo PCB for wire feed
Package includes
Controller
Connection cable controller to power source
Power cable
USB stick, 1GB
Tigtronic Basic 4 Controller
Low cost, compact microprocessor based orbital controller for applications with open framed weld heads,
enclosed weld heads, tube-tubesheet weld heads and turn tables. The Basic Controllers are based on our established Tigtronic Orbital Controller.
Controller Tigtronic Basic 4, Item No. 1.3.0204
Specification as per the Tigtronic Basic 3
With software package specific for tube to tubesheet RBK weld heads only
Package includes
Controller
Connection cable controller to power source
Power cable
USB Stick, 1GB
Tigtronic Orbital 4 Controller
The 4th generation of our most popular tried-and-tested controller.
For use with either of the TETRIX 200 or TETRIX 351 inverters.
Controller Tigtronic Orbital 4, Item No. 1.3.0012
5.7″ 'flip up' display
Simple, multilingual operator guidance through auto programming of weld schedule parameters (tube outside diameter, wall thickness and weld head code)
Gas and water cooling monitoring
Tacking mode which can be activated and programmed as requried
Options for 6 level programming with step and continuous travel modes
Simple tuning of auto calculated parameters by individual level or overall percentage
The output and wire feed parameters can be changed 'on the fly' (during welding)
Graphic display of the welding progress
Real-time monitoring of the welding parameters
Integrated weld counter (assignable to iso drawings and weld numbers)
Storage of up to 99 programmes
Storage of up to 400 actual weld data records
Data transfer of weld data records and programmes via USB interface
Software updates possible
Diagnostic fault detection system
Options for connecting a remote control pendant (Note: The controller can also be operated without a remote pendant)
Interface for connection of both oxygen and purge pressure analysers
Servo PCB for wire feed
Integrated printer
Compact and lightweight with outer dimensions (L x W x H) 405 x 325 x 170mm and a weight of only 6.5kg
Auto ranging input voltage 90 – 260 VAC
Optional
COOL 50 water-cooling unit
AVC upgrade kit
Package includes
Controller
Connection cable controller to power source
Power cable
USB Stick, 1GB
Tigtronic Compact Controller
Portable compact system, based on the inverter TETRIX 200 auto range combined with the TIGTRONIC ORBITAL 4 controller.
Compact Orbital System Tigtronic Compact (AUTO RANGE), Item number: 1.3.0205
5.7″ 'flip up' display
Simple, multilingual operator guidance through auto programming of weld schedule parameters (tube outside diameter, wall thickness and weld head code)
Gas and water cooling monitoring
Tacking mode which can be activated and programmed as requried
Options for 6 level programming with step and continuous travel modes
Simple tuning of auto calculated parameters by individual level or overall percentage
The output and wire feed parameters can be changed 'on the fly' (during welding)
Graphic display of the welding progress
Real-time monitoring of the welding parameters
Integrated weld counter (assignable to iso drawings and weld numbers)
Storage of up to 99 programmes
Storage of up to 400 actual weld data records
Data transfer of weld data records and programmes via USB interface
Software updates possible
Diagnostic fault detection system
Options for connecting a remote control pendant (Note: The controller can also be operated without a remote pendant)
Interface for connection of both oxygen and purge pressure analysers
Servo PCB for wire feed
Integrated printer
Auto ranging input voltage 90 – 260 VAC
Technical Data
Output DC
Mains voltage AC 90 – 260V
Mains frequency 50 / 60Hz
Power rating 4,4kVA
Generator output 7,5kVA
Current range 5 A– 200 A
Current duty cycles
25% TIG / MMA 200 A
60% TIG / MMA 150 A
100% TIG / MMA 120 A
Weight 24 kg
Diemsions (L x W x H) 624 x 298 x 480 mm
Optional
COOL 50 water cooling unit, flange connected
Upgrade kit AVC
Package includes
Compact System
Power cable
USB Stick, 1GB
CobraTig 150 XM - Portable GTAW Orbital Tube Welder
The CobraTig® 150 XM is a portable, lightweight orbital welding power source with a digital controller that is the perfect solution for construction or rugged environments.
User friendly LCD screen and simple menus guide users through powerful weld programming using SmartArc® logic, real-time data monitoring, plus a built-in thermal printer for weld data. Packaged for rugged construction environments or manufacturing work-cells.
• 150 Amp inverter power supply
with MicroTig™ Technology
• SmartArc® Digital Controller
with data monitoring and logging
• High speed thermal printer
• Argon regulator/flow meter
• Gas hose with fittings
• Shipping and storage case
Shipped in a sealed rugged case with wheels for easy mobility.